You’ll receive a confirmation email with the details shortly.
Knot Filler ReadySet
Until July 31st, orders will include free ground shipping to celebrate our team heading to AWFS 2019.
The ReadySet contains:
- 1 variable-temperature heating gun used to dispense knot filler.
- 1 aluminum cooling block, 80mm x 180mm / 3 x 7 inch dimensions with handle. This tool is used to draw heat out of the hot filler and solidify your repair.
- 1 wide steel Knot Filler flat-bottom chisel with birch handle. After applying the cooling block, the chisel is used to remove excess filler from the repair surface.
- 1 single-color bag of Knot Filler rods, Each pack contains 9 rods of the same color.
Step 1: Load the Knot Filler rod into your gun, and turn it on. Wait for your knot filler gun to heat to the melting point of your chosen Knot Filler color (table below)
Step 2: Use the gun to apply the filler to the wood imperfection. Be sure to apply slightly more at the end of the repair.
Step 3: Use a cooling block to cool down the hot material. Place it on the filled imperfection and let stand for about 30 to 60 seconds, depending on the size of the repair.
Step 4: Using a knot filler chisel, remove any excess filler.
Step 5 (optional): Lightly sand the newly-filled imperfection to blend it and achieve a natural-looking repair.
|Color||Melting Point||Can Be:|
|White||140°C / 285° F||Cut|
|Ash||140°C / 285° F||Cut|
|Pine||140°C / 285° F||Cut|
|Beech||140°C / 285° F||Cut|
|Oak||140°C / 285° F||Cut|
|Semi-Transparent/Knot||140°C / 285° F||Cut|
|Black||160°C / 320° F||Cut and Sanded||Walnut||160°C / 320° F||Cut and Sanded||Cherry||160°C / 320° F||Cut and Sanded|
|Mahogany||160°C / 320° F||Cut and Sanded||Pine Light||160°C / 320° F||Cut and Sanded||Yellow||160°C / 320° F||Cut and Sanded||Gray||160°C / 320° F||Cut and Sanded||Wenge||210°C / 410° F||Sanded|